France
Spain
T82N T
Analog transducer for physical electrical quantities ( °C ) - 1 analog output
ELINK IEC61850
Standard
Secure remote connection
Electrical substation envt.
Product presentation
Designed for energy market applications, the ELINK 61850 network gateway enables communication between ENERIUM measurement stations and TRIAD 2 converters via the IEC 61850 protocol.
ENERIUM and TRIAD 2 products can thus be viewed as native IEC 61850 products by any IEC 61850 SCADA/RTU client supervision system or controller.
• Neutral: ELINK 61850 enables IEC 61850 communication without compromising its selection and qualification as a Chauvin Arnoux Energy measurement solution.
• Installation upgrade: ELINK 61850 interfaces with existing equipment and enables the installation to be upgraded to a digital substation.
• Complete: All electrical measurements from Chauvin Arnoux Energy measuring equipment are carried by the IEC 61850 communication protocol: - Instantaneous measurements for TRIAD 2 - Instantaneous, min/max/avg, energy and power quality measurements for ENERIUM
• Scalable: Chauvin Arnoux Energy teams are responsive in offering solutions that allow you to adapt ELINK 61850 to your configurations
Communication on the IEC 61850 network of our ELINK61850 solution and our ENERIUM and TRIAD 2 measurement products is certified by the independent laboratory DNV GL.
Standard
Secure remote connection
Electrical substation envt.
Contact a sales representative
Need information about our solutions? Our experts are available to advise you and assist you with your project. Contact a sales representative now for a detailed presentation and a quote tailored to your needs.
Highlights
- TRIAD2 and ENERIUM considered as native IEC 61850 products
- Communication: IEC 61850 server - Edition 2 / Modbus RS485 master
- High performance: up to 20 slave devices
- Easy implementation via embedded web pages
Features
Electrical specifications. Auxiliary power supply
Alternative network
80 to 265 Vac - 10 VA / 42.5 to 69 Hz
Continuous network
80 to 265 Vdc - 7 W
Power reserve
2.5 seconds at 230 Vac
Communication. IEC 61851 protocol
Parts
CEI 61850-1, CEI 61850-5, CEI 61850-7
Communication. IEC 61852 protocol
Supported logical nodes
MMXU, MMXN, MSTA, MMTR (Triad2/Enerium), MHAI, MHAN (Enerium)
Communication.
Ethernet port
RJ45 - 8 contacts / 10 - 100 base T
RS485 A and RS485B ports
Type: RS485 independent - 2 insulated wires Protocol: Modbus RTU mode Operation: Half-duplex master mode Speed: 300 to 115,200 bauds
Mechanical specifications.
Ground
560 g
Assembly
On DIN rail
Connection Cable cross-section
Screw terminal block 6 mm² single-strand wire - 4 mm² multi-strand wire
Dimensions
120.5 x 120 x 81 mm (D x W x H)
Environmental constraints.
Operating temperature
-10 °C to +55 °C
Storage temperature
-25 °C to +70 °C
Ingress protection
IP20
Degree of pollution
2
Installation category
III
Safety standard
CEI 61010
Electromagnetic standards
CEI 61000-4-2/3/4/5/6/8/11/12/18 - CISPR22 CEI 61000-6-5 (Zone 2)
Documentation and support
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Language *
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
ELINK IEC61850 Gateway
P01380850
ELINK IEC61850 Modbus RS485 to IEC61850 communication gateway - Digitization of electrical data measured by Enerium measuring stations or Triad 2 measuring converters
Request a quote
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
