France
United Kingdom
Germany
Italy
MEMO P200
Simple, high-performance 96x96 power monitor - Designed for general applications
ENERIUM 300
Class 0.2s
Standard
Waveform capture
Harmonic disturbance meas.
High-readability display
Product presentation
Manufactured in our French factories, the ENERIUM range of power meters is specifically designed for electrical optimization and power quality monitoring in industrial sites and power grids.
Thanks to advanced measurement functions, it allows for power quality analysis, correlation of climate data with energy consumption, and alerts to the user in case of critical electrical parameters being exceeded.
With a compact 144x144mm form factor that easily integrates into electrical cabinets, the ENERIUM 300 power meter is suitable for precise and accurate measurement (accuracy 0.2 s) of any HV/MV/LV electrical supply or supply.
Analyzing the behavior of the electrical installation is done in just a few clicks on the ENERIUM 300 screen: alarm log, Fresnel diagram, harmonic analysis by order, EN50160 compliance report, log of trough/outage events, overvoltages, etc.
The integrated Ethernet or RS485 communication interfaces allow for remote operation and control of the product.
Its digital and analog inputs and outputs (up to 8) allow for easy integration into a monitoring or control architecture.
Class 0.2s
Standard
Waveform capture
Harmonic disturbance meas.
High-readability display
Contact a sales representative
Need information about our solutions? Our experts are available to advise you and assist you with your project. Contact a sales representative now for a detailed presentation and a quote tailored to your needs.
Video
MEMO & ENERIUM power monitors
Enerium and Memo power metering devices are essential tools for minimizing your energy consumption and optimizing your electrical installation in low, medium, or high voltage.
Highlights
Monitoring of compliance with the EN50160 standard
Detection of voltage dips and surges
Event-based waveform capture
Harmonic analysis
Class 0.2s
Made in France
Features
Electrical specifications. Electrical network
Maximum measured phase-to-phase voltage
650 kV
TT ratio
Primary TT: 100 V to 650 kV
Secondary VT: 100 V to 480 V
Max. measured current
25,000 A
CT ratio
Primary CT: 1 A to 25 000 A
Secondary CT: 1 A or 5 A
Max. measured power
2 GW
Electrical specifications. Voltage inputs (AC)
Measurement range
From 5 to 130% of Vn for Vn = 57.7 / 230 V (ph-N)
From 5 to 130% of Un for Un = 100 / 400 V (ph-ph)
Crest factor
2
Measurement accuracy (U and V)
0.2% from 20% to 130% of Un
.Voltage swell
Transient U = 800 V for 24 hours.
Permanent 130% of 400 V = 520 V
Frequency
50/60 Hz
Consumption
< 0.1 VA
Input impedance
1 MΩ
Electrical specifications. Current inputs (AC)
Measurement range
From 1% to 130% of In for In = 5 A
.Crest factor
3
Measurement accuracy
0.2% of ≥ 10%... ≤ 130%
0.5% of ≥ 5%... ≤ 10%
1% from ≥ 1% to ≤ 5%
Acceptable overload
Transient I = 250 A for 1 second.
130% of 5 A = 6.5 A continuous
Consumption
< 0.15 VA
Electrical specifications. Compliance with standards
CEI 62053-21/22
Active energy class 0.2 s
CEI 62053-23/24
Reactive energy class 0.5 s
CEI 61557-12
class 0,2
PMD SD/SS
Active energy class 0.2.
Reactive energy class 0.2
Electrical specifications. RS485 output
Connection
2 wire, half duplex
Protocol
ModBus / JBus RTU mode
Speed (configurable)
2400 - 4800 - 9600 - 19 200 - 34 800
Parity
Even, odd or no parity
Jbus addresses
1 to 247
Electrical specifications. ETHERNET output
Type
RJ45 - 8 points
Protocol
ModBus / TCP
Speed (configurable)
Compatible with 10, 100 and 1000 base T networks
Electrical specifications. Auxiliary power supply
Power supply
80 to 265 Vac (< 20 VA)
42,5 to 69 Hz
80 to 265 Vdc
19 to 57 Vdc (< 10 W)
Electrical specifications. Inputs / outputs
Max number of inputs / outputs
8
Environmental specifications.
Temperature of use
-10 °C to +55 °C (K55 according to IEC 61557-12)
Operating humidity
95 % to 40 °C
Storage temperature
-25 °C to +70 °C
Mechanical specifications.
Assembly
Front panel
Size
144 x 144
Documentation and support
Language *
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
ENERIUM 300 Customizable Power metering device
ENERIUM300-CFG
ENERIUM 300 Customizable Power metering device - 144x144mm format - Power quality analysis (events, EN50160) - Reference standard IEC 61557-12 - Panel mounting - High-readability display - Accuracy class 0.2s
ENERIUM 300 Power metering device communication RS485 / power supply high level
P01330816
ENERIUM 300 Power metering device - Size 144x144mm - Power quality analysis (events, EN50160) - Modbus RS485 communication - High level auxiliary power supply - Reference standard IEC 61557-12 - Accuracy class 0.2s
ENERIUM 300 Power metering device communication Ethernet / power supply 230Vac
P01330817
ENERIUM 300 Power metering device - Size 144x144mm - Power quality analysis (events, EN50160) - Ethernet communication - High-level auxiliary power supply - Reference standard IEC 61557-12 - Accuracy class 0.2s
ENERIUM 300 Power metering device communication RS485 / power supply low level
P01330818
ENERIUM 300 Power metering device - Size 144x144mm - Power quality analysis (events, EN50160) - Modbus RS485 communication - Low level auxiliary power supply - Reference standard IEC 61557-12 - Accuracy class 0.2s
ENERIUM 300 Power metering device communication Ethernet / power supply 230Vac
P01330819
ENERIUM 300 Power metering device - Size 144x144mm - Power quality analysis (events, EN50160) - Ethernet communication - Low-level auxiliary power supply - Reference standard IEC 61557-12 - Accuracy class 0.2s
Request a quote
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
