France
Germany
Italy
Spain
E.Qual - Premium
Processing software for your network analyzers - Printing of energy quality reports and backup of measurement campaigns
MAP607
Standard
USB communication mode
Waveform capture
Recording function
Product presentation
The MAP 607 analyzer is so simple to use, than you only have to connect the analyzer to a standard 230 Vac power socket to record all the disturbances on an LV distribution network and:
- Display in real time the status of the network and any disturbances
- Analyze later on the causes of the equipment dysfunction linked to the voltage and frequency fluctuations or the presence of harmonics
- Compare the network quality parameters to a reference standard
The main specifications are as follows:
- Voltage measurement on 2 channels: Phase-Neutral and Phase/Neutral-Earth
- Measurement of all the quality measurement parameters according to the predefined standard (e.g. EN 50160)
- Sampling rate: 12.8 kHz
- Accuracy < 0.1 %
- Possible configuration of voltage dip, overvoltage and transient disturbance detection
- Automatic backup of recorded data in the event of a power cut
- Self-powered via the power socket
- Very compact: 120 x 65 x 65 mm
- USB communication port
- Direct display of the status parameters by LEDs: "OK" or "Outside template"
- Software supplied for configuration and real-time display (Qual-SRT) and for analysis and reporting (Qual-view)
- Delivered as standard in a rugged, watertight case with its USB cable
Standard
USB communication mode
Waveform capture
Recording function
Contact a sales representative
Need information about our solutions? Our experts are available to advise you and assist you with your project. Contact a sales representative now for a detailed presentation and a quote tailored to your needs.
Highlights
Features
Electrical specifications
PH/N voltage input,
0-300 V RMS
Connection
Connection to EU domestic socket
Auxiliary power supply
Power supply via voltage input (10 s power reserve)
Signal processing specifications
Sampling
12.8 kHz / 16 bits (Anti-aliasing filter and PL synchronisation)
Bandwidth
3.5 kHz
Reference standards measurement
IEC 61000-4-30
IEC 61000-4-7
IEC 61000-4-15
Measured parameters
Voltage, frequency, Unbalance, Harmonics, Flicker (Pst, Plt)
Mechanical specifications
Dimensions
120 x 65 x 65 mm
Weight
0.3 kg
Documentation and support
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Language *
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Software for configuration, real-time display and analysis for measurement campaigns with MAP607 and MAP COMPACT network analyzers
The Qual-SRT software can be used for configuration and real-time display on the MAP607:
- Measurements from the MAP607's two channels
- The number of voltage dips / overvoltages / long outages / brief outages / transients recorded
- Global status of the last EN50160 report
- Memory occupation rate
- Equipment date and time
Dynamic views are also available: graph of trends (logger-type view) and harmonics bargraph up to 50th order. Thanks to the self-declaring ultra-fast USB2.0 link, this module can also be used for near-instantaneous data recovery and deletion of the data in the equipment.
The Qual-SRTc software can be used for configuration and real-time display on MAP COMPACT:
- Measurements of electrical parameters with display of Fresnel diagram and harmonics bargraph
- Total of the active, reactive and apparent energy indices
- Memory occupation rate
- Equipment date and time
The Qual-View software is the analysis and report generation tool for MAP COMPACT and MAP607:
It offers a veiw of all the trend curves generatedby the equipment, with the possibility of zooming and graphical display of the limits of the qualimetric template for each parameter.
Event-related views with the event signature, waveform and time/date-stamped events log are also available via dedicated tabs in Qual-View.
Contact support
Have a question about using or installing your equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
MAP607-PACKAGE
MAP607-P
MAP607-P Single-phase electrical network quality analyzer - Male connector for connection to electrical outlet - Compliant with IEC61000-4-30 Class A standard - Kit includes carrying case and USB connection cable
Request a quote
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
