Calibration & Verification
It the laboratory or on site, in France and internationally.
Manumesure offers a unique partnership to verify and calibrate your fleet of measuring instruments.
These services are proviced in our technical centres or on your site.
Two types of documents are issued, depending on your requirements:
- "FDX 07.011" verification certificate
- "FDX 07.012" calibration certificate
All our measurements have guaranteed metrological traceability to the national standards. These metrological verifications and calibrations can be performed for a large number of different measurement quantities.
The instrument families covered are listed below:
- Electricity: multimeters, megohmmeters, calibrators, loggers, wattmeters, power supplies, current clamps, etc.
- Low frequency: oscilloscopes, frequency meters, meters, function generators, fieldmeters, spectrum analysers, wattmeters, etc.
- High frequency: spectrum analysers, probes, amplifiers, attenuators, loads, radio test benches, filters, SWR meters, scalar analysers, frequency meters, wattmeters, etc.
- Telecom & IT: LAN testers (categories 4, 5, 6 and 6A), ADSL testers…
- Climatics: thermometers, hygrometers, anemometers, calibrators, Pitot tubes, gas flowmeters, collection systems, leak detectors, combustion analysers, etc.
- Dimensions: shims, pins, vernier callipers, micrometers, vee blocks, measuring columns, comparators, 3D systems, gauges, etc.
- Force: force sensors, torque wrenches, crimping tools, etc.
- Weighing: weighing machines, weights, etc.
- Pressure: manometers, pressure sensors, calibrators, etc.
- Physics & chemistry: pH-meters, conductivity meters, luxmeters, pyranometers, tachometers, etc.
Environment
MANUMESURE, the specialist in air, noise and water measurements
Watch the video (in French)
Summary of our services
Our expertise
MANUMESURE offers its know-how to quantify industries' impact on the environment.
Controlling their environmental impacts has become a major issue for industrial companies in order to reduce their ecological footprint, their energy consumption and their consumption of raw materials, while also improving their competitiveness.
MANUMESURE has been developing its expertise in environmental measurements concerning air, noise and water (waste water, rain water and underground water) for nearly 25 years.
Measurement of air quality
MANUMESURE works on site to test atmospheric emissions, with COFRAC Tests accreditation.
- Measurement of gases: O2, CO2, CO, NOx, COV, CH4, etc.
- Measurement of dust, PM10 & PM 2.5, etc.
- Measurement of metals, HF, HCl, SO, NH3, N2O, etc.
- Measurement of PCDD & PCDF, PAHs, etc.
MANUMESURE also provides verification of the "QAL2 and AST" measurement lines with COFRAC Tests accreditation.
In addition, MANUMESURE performs measurements of diffuse atmospheric deposition around sites.
Dust, dioxin, VOCs, benzene or any other molecule on request.
Measurement of noise levels
Manumesure performs regulatory noise-level testing on environmentally-sensitive installations.
The impact of the noise generated by an industry may disturb the neighbourhood and lead to conflict. Noise-level assessment is a regulatory requirement for environmentally-sensitive installations in France and in many other countries.
The regulations impose measurements at the property lines of sites and in regulated emergence zones (near housing).
Measurement of water quality
MANUMESURE performs on-site sampling in order to analyse water quality (waste water, rain water and underground water).
Water is an essential natural resource for living creatures and for human and economic activities, so it must be protected.
The regulations oblige industrial companies to monitor the quality of their water.
Health
Services for hospitals, clinics, laboratories, pharmaceutical industry and cosmetics industry.
Watch the video (in French)
Summary of our services
Laboratory equipment: verification and calibration
MANUMESURE provides metrological verification and periodic qualification of equipment in medical analysis laboratories, hospital laboratories, the pharmaceutical industry and the cosmetic industry.
Verification: CO2, incubators, freezers, hygrometric sensors, conductivitymeters, pH-meters, etc.
Qualification: thermocyclers
Temperature mapping on site: climatic chambers, ovens, freezers, refrigeration chambers, incubators, etc.
COFRAC Tests accreditation no. 1-1623.
Scope available at www.cofrac.fr
COFRAC calibration : temperature sensors on site, pressure sensors, micropipette volumes, centrifuge rotation speeds.
Scope available at www.cofrac.fr
ECME (inspection, measurement and test equipment): verification and calibration on site
MANUMESURE provides metrological verification and periodic qualification of biomedical testers and inspection, measurement and test equipment (ECME) used in hospitals, clinics, etc.
Measuring instruments: conductivity meters, gas flowmeters, ergometers, luxmeters, luminance meters, manometers, dimensional measurements, multimeters, thermometers, etc.
Simulators: PNI, SPO2, ECG, etc.
Biomedical testers: for cardiotocographs, infusion machines, incubators, scalpels, defibrillators, respirators, electrical safety, etc.
Management of your fleet of measuring instruments
MANUMESURE provides computerized management and maintenance of your fleet of measuring instruments, whatever their type and brand.
Customer references
In the Health Sector
MANUMESURE's customers include:
• More than 250 public hospital sites
• More than 100 clinics
• Hospital care at home services
• Dialysis associations
• Regional Fire and Emergency services
• The leading medical equipment manufacturers
In the Environmental Sector
Major French and international companies have been working with MANUMESURE for more than 25 years:
EXXON / TOTAL / ARCELOR MITTAL / RIO TINTO / BAYER / SANOFI / EDF/ SOLVAY / VEOLIA / EIFFAGE / VICAT / CONSTELLIUM ...
In Industry
For many years now, the largest French and international companies have placed their trust in Manumesure:
EDF / TOTAL / EXXON / SNCF / ALSTOM / HONEYWELL / VALEO / STMICROELECTRONICS / SANOFI / SCHNEIDER / LEGRAND / VEOLIA / GRTGAZ / BOUYGUES ...
Quality references
MANUMESURE has a large number of accreditations, certifications and qualifications.
The excellence of a quality system
&
human expertise.
ISO 9001 & 14001 Certifications
All of Manumesure's sites are certified
ISO 9001 for quality management
&
ISO 14001 for control of their environmental impact.
COFRAC accreditations and MASE certifications
Manumesure benefits from a large number of
COFRAC Calibration, Tests & Inspection
accreditations.
Services provided in the laboratory and on site.
Scopes of these accreditations available at www.cofrac.fr
The Manumesure technical centres at Pont-l'Evêque & Lyon also have MASE certification for safety management on hazardous industrial sites.
Find out more: MASE
About us
Metrology, regulatory testing and industrial maintenance
MANUMESURE is the Chauvin Arnoux Group company specialized in metrology and regulatory testing.
It performs metrological verification, maintenance and management for fleets of measuring, inspection and test instruments in its laboratories or on customers' sites. The company also offers regulatory testing covering environmental issues (atmospheric pollutant emissions, noise, etc.), personal safety (inspection of electrical installations, etc.) and hazard prevention (thermography, etc.)
MANUMESURE has structured its service offering on three major market segments: Industry, the Environment and Health.
With 12 technical centres in France and a team of travelling experts, the company provides full national coverage, thus guaranteeing a quick response wherever customers need it.
Our experts often also provide services abroad.
The services proposed are all performed in compliance with the standards and constraints for traceability to the national reference standards. All MANUMESURE's laboratories have COFRAC accreditation certifying the technical competence of our teams and guaranteeing their impartiality.
The company is certified ISO 9001 and 14001 and MASE and is approved by the French Ministry of the Environment and Ecology.
MANUMESURE is also a certified training organization, offering training courses in multiple technical fields to meet customers' needs.
Industry
Services in our laboratories or on our customers' sites, in France and internationally.
Watch the video (in French)
Summary of our services
Management of fleets of measuring instruments
Manumesure provides computerized management and maintenance of your fleet of measuring instruments, in accordance with the ISO 9001 requirements, whatever the type and brand of instrumentation.
Verification and calibration of measuring instruments
Manumesure offers you a unique partnership to verify and calibrate your fleet of measuring instruments.
Two types of documents are provided, depending on your requirements:
- "FDX 07.011" verification certificate
- "FDX 07.012" calibration certificate
COFRAC calibration in laboratories
Manumesure possesses COFRAC-accredited "Calibration" laboratories for the following quantities: Electricity & Magnetism, Time & Frequency, Dimensions, Temperature, Pressure and Micropipettes.
The scope of each accreditation is described at www.cofrac.fr
Temperature mapping of furnaces, ovens, etc. …
MANUMESURE has COFRAC “Tests” accreditation for temperature mapping from -80 to +400 °C, accreditation no. 1.1623
Scope available at www.cofrac.fr
Verification of electrical installations
Manumesure has COFRAC "Inspection” accreditation for verification of permanent electrical installations in workplaces (accreditation no. 3-145).
Scope available at www.cofrac.fr
Manumesure is also approved for "Insurance” by the CNPP (French national centre for prevention and protection), as per reference document Y18. Certification no. 146/18.
Safety inspection with infrared thermography
Manumesure offers inspection services using infrared thermography: display of load unbalance, detection of abnormal hot spots or bad connections in an electrical cabinet, etc.
MANUMESURE's operators are "APSAD"-certified by CNPP (French national centre for prevention and protection), as per reference document D19.
Fiche produit upload
C+D Automatika Kft.
Chauvin Arnoux, a long-term partner of the Education sector
Taking advantage of its close, privileged relationship with the French National Education system, the Chauvin Arnoux Group accompanies the actors in the education system by taking part in a large number of events, by publishing the "Cahiers de l'Instrumentation", a review specially designed for teachers, and by offering measuring instruments which are ideal for teaching.
Every year, the Chauvin Arnoux Group partners and sponsors a large number of events linked to the education sector and designed to promote technical and scientific training by loaning measuring instruments, participating in judging panels and providing prizes.
The "Club du Mesurage" (Measurement Club): a pool of skills
A strong, long-term commitment!
In 2000, Chauvin Arnoux set up the "Club du Mesurage", a veritable think tank on "School/Company" issues in order to create a constant flow of information concerning the evolution of the standards, the new market requirements, applications, particularly new ones, etc.
Open to all member of the Education sector, this Club fosters genuine debate, while also creating a pool of skills between two communities which share two objectives:
-Mastery of measuring techniques in order to understand and explain them better,
-Advance information on any changes so that, when students start work, they can be operational more quickly.
One of the Group's major goals is to keep up to date with the changes to the curricula and educational reforms, such as the creation in France of the STI2D Baccalaureate (Science and Technologies of Industry and Sustainable Development) in 2011, so that it can design the measuring instruments required for the professions of tomorrow.
In 2000, the foundation of the "Club du Mesurage" brought together School Inspectors from Paris and the French regions and Chauvin Arnoux staff members, under the aegis of the General Inspector for Science and Industrial Techniques in the French National Education System. The club meets annually and an editorial board decides on the content of Chauvin Arnoux's magazine for the educational sector, Les Cahiers de l’Instrumentation.
A collection of practical exercises: Les Cahiers de l'Instrumentation
Les Cahiers de l'instrumentation is a magazine containing practical exercises for teachers and their students which present solutions or case studies involving the use of measurement, res or energy management instruments in concrete situations.
The first issue was published in 2000 , with a new issue planned every year. Dedicated to secondary and higher scientific and technical education and designed by teachers and school inspectors, Les Cahiers de l’Instrumentation enables teachers and their students to become familiar with the scientific processes and instruments on the market. The funding and graphic design for the magazine are provided by the Chauvin Arnoux Group which also sends it free of charge to any teachers wishing to receive it. This publication is only available in French.
